In this article, we will discuss how to setup the AJA Capture Device and where you can purchase it.


Overview

The Synergy Editor 11 includes support for a new video capture device that simplifies the capture process from your camera or other video sources. The live capture workflow requires the use of an AJA U-TAP capture device.



 



The AJA-UTAP comes in both an HDMI version and an SDI version. 

 

The AJA-UTAP supports the following:

  • Capturing video via an HDMI chord (HDMI model)
  • Capturing video via an SDI chord (SDI model)
  • USB 3.0 connection to a desktop or laptop computer

Setting Up and Understanding the AJA U-TAP

HDMI VERSION: 

Status LED

  • Off = not connected
  • Red = USB connected to a USB 2.0 port
  • Green = USB connected to a USB 3.0 port
  • Blinking = U-TAP is streaming video, audio, or both power 

LED

  • Off = no power
  • Green = power present

U-TAP HDMI LOCK LED

  • Off = not locked to source video
  • Green = locked to SD video source
  • Red = locked to an HD video source

SDI VERSION

Status LED

  • Off = not connected
  • Red = USB connected to a USB 2.0 port
  • Green = USB connected to a USB 3.0 port
  • Blinking = U-TAP is streaming video, audio, or both power 

LED

  • Off = no power
  • Green = power present

U-TAP SDI LOCK LED

  • Off = not locked to source video
  • Green = locked to 270Mbps source
  • Red = locked to 1.5Gbps video source
  • Amber = locked to 3Gbps video source

System Connection

Connecting to the AJA U-TAP device is very simple and requires no additional software. View the diagram above for how to connect the device. Be sure to use any included cords that come with the device to ensure a good connection.

 

Where to Purchase

The AJA-UTAP can be purchased from several retailers, including:

 

They can also be found at other retailers; if you purchase from another retailer please be sure the device matches the products linked above.

 

If you need to convert from SDI to HDMI or HDMI to SDI to support your setup, several adapters are available:

 

­If you require assistance using the AJA device with Synergy Editor 11 please feel free to contact our Support Team at any time by phone 1-800-411-1627, or by email at [email protected]