How to Connect the Synergy Automated Camera System to the Synergy Editor for Local Capture

Modified on Mon, 29 Apr 2024 at 08:24 PM

In this article, we will discuss how to use the Synergy Automated Camera System to live capture video and connect it directly to the server using an AJA box. 

 

Below is an example image of an AJA box:



Getting Started

The Synergy Automated Cameras provide the ability to live capture video and connect to the server using an AJA box. On the back of the server, at the bottom, there is both a SDI connection and HDMI connection. The SDI connection and HDMI connection are the default video outputs that need to be connected to the AJA box in order to ensure the video is able to be sent to the server. Using either of these outputs, you can connect it directly into the AJA box and you will be able to capture video directly from the default feed in your Synergy Automated Camera System. 



What is the Default Feed?

The default feed is the center court camera that pans the arena and is the feed that would be transmitted out of the video outputs in the Synergy Automated Camera.

An example Synergy Automated Camera set up could be that a team has 3 cameras. The first camera is on one end of the court, the second being a camera on the other side of the court (so each is filming the half court) and then a central camera that pans back and forth. The central camera that pans back and forth would be an example of the default feed.

 

Friendly Reminder: If you have any issues with connecting your Synergy Automated Camera System or you need further assistance, please feel free to contact us and we will be more than happy to help!

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article